日韩一级二级一区二区_超级国产人人偷人人干_日本日本乱码伦视频在线_亚洲性视频日韩性视频

PA6 BKV 130 GIT DUS008 900116德國朗盛Durethan 30%玻纖增強(qiáng)耐沖擊尼龍6塑料（18024445500）

PA 6, 30 % glass fibers, injection molding, improved impact strength, GIT/WIT



ISO Shortname: ISO 1874-PA 6-HI, GR, 14-090, GF30

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.2　
C Molding shrinkage, transverse 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.5　
Post- shrinkage, parallel 60x60x2; 120 °C; 4 h % ISO 294-4 0.06　
Post- shrinkage, transverse 60x60x2; 120 °C; 4 h % ISO 294-4 0.15　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 9000 5000
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 160 95
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3.4 7.5
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 85 85
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU 65 60
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA 15 20
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA 10 10
Izod impact strength 23 °C kJ/m² ISO 180-1U 75 60
Izod impact strength -30 °C kJ/m² ISO 180-1U 60 55
Izod notched impact strength 23 °C kJ/m² ISO 180-1A 15 15
Izod notched impact strength -30 °C kJ/m² ISO 180-1A 10 10
Flexural modulus 2 mm/min MPa ISO 178-A 8500 4900
Flexural strength 2 mm/min MPa ISO 178-A 256 145
Flexural strain at flexural strength 2 mm/min % ISO 178-A 4.1 6.3
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 230 122
C Puncture maximum force 23 °C N ISO 6603-2 935　
C Puncture maximum force -30 °C N ISO 6603-2 770