無錫無塵車間地坪價格是多400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
環氧樹脂自流平地坪漆是為了滿足客戶對地面潔凈度有著極高要求而設計生產的。它與一般的環氧地坪漆相比較，對于地面的潔凈度更加的高，強度也更高，裝飾效果強等等,那么我們?cè)谑┕きh(huán)氧自流平的時候需要注意什么呢?
首先建議使用酸洗的方法來處理基面，方法是：使用濃度為10%~15%的酸洗混凝土基面，等到酸洗的地面不出現氣泡現象，再使用大量的清水對地面進行清洗處理，這樣可以**的**地面泥漿層并且增加地面會有粗糙度，有了粗糙度才能讓地坪漆更好的附著。
施工環氧樹脂自流平地坪漆最基本的要求就是基層表面平整沒有起砂現象，并且含水率、PH值等需要符合要求。含水率要小于9%;基面PH值小于10為合格;強度刀刀21.0SPa為宜;地面平整度**偏差小于2mm。
服務決定價值，服務客戶就是我們?yōu)樽约悍⻊?wù)，武漢肯耐特工程愿同各領域的同仁攜手共進，共同追求發展，享受**成功。如有施工環氧樹脂自流平地坪需要?dú)g迎聯系我們。因?yàn)榄h(huán)氧地坪漆是雙組或多組分材料，通過調配來施工出適合各種場景的環氧地坪。而我們根據根據場地來判斷應該調配出什么樣的環氧地坪材料，就像電子元件制造廠就比較適合防靜電環氧地坪。
調配涂料過程中一定要注意雙組分涂料的配比，固化劑加多了地坪會比較硬，容易斷裂，但是固化劑加少了地坪又比較容易彎折且耐水性能較差。
在添加稀釋劑配置的時候要特別注意周邊的環境條件，如果施工的地基較為潮濕的話，就會讓環氧地坪表面出現泛白現象。
服務決定價值，服務客戶就是我們?yōu)樽约悍⻊?wù)，武漢肯耐特工程愿同各領域的同仁攜手共進，共同追求發展，享受**成功。如有施工防靜電環氧地坪需要?dú)g迎聯系我們
Self-leveling epoxy floor paint is on the ground in order to meet customer requirements for cleanliness and has a very high design and production. It compares with the general epoxy floor paint, more high ground for cleanliness, intensity is also higher, strong decorative effect, etc., then we need to pay attention to what the construction epoxy self-leveling time?
First suggested the use of pickling methods to deal with the base surface, the method is: use a concentration of 10% to 15% of hydrochloric acid concrete surface, the ground does not appear until the pickling bubble phenomenon, then use a lot of water on the ground to clean process, which can effectively remove surface mud layer and increase the ground have roughness, with roughness in order to allow better adhesion of floor paint.
Construction self-leveling epoxy floor paint the basic requirement is not the grassroots level from the sand surface phenomenon, and moisture content, PH value, etc. need to meet the requirements. The moisture content to less than 9%; the base surface PH value of less than 10 qualified; intensity knife 21.0SPa appropriate; floor flatness The maximum deviation of less than 2mm.
Service to determine the value, customer service is our self-serving, Wuhan Kennett engineering colleagues are willing to work together in various fields, the common pursuit of development, and enjoy exceptional success. If self-leveling epoxy floor construction needs are welcome to contact us. Because the epoxy floor paint is a two-group or multi-component material, through to construction suitable for a variety of deployment scenarios epoxy floor. And we should be judged according to the site based on the deployment of what kind of epoxy material, like electronic components factory is more suitable for anti-static epoxy floor.
Deployment coating process must pay attention to the ratio of two-component coating, curing agent adds a floor would be more hard, easily broken, but the curing agent added less floor and relatively easy to bend and poor water resistance.
Configuration when adding diluent, paying particular attention to the environmental conditions surrounding, if the construction of the more damp ground, it would appear to make epoxy surface whitening phenomenon.
Service to determine the value, customer service is our self-serving, Wuhan Kennett engineering colleagues are willing to work together in various fields, the common pursuit of development, and enjoy exceptional success. If anti-static epoxy floor construction needs are welcome to contact us
資訊來源：<聯系電話:400-0709-910>
|
您當前的位置: 首頁 > 行業資訊
